Class 10 Science - Chapter Electricity NCERT Solutions | Compute the heat generated while transfe

When a 12 V battery is connected across an unknown resistor, there is a current of 2.5 mA in the circuit. Find the value of the resistance of the resistor.

A hot plate of an electric oven connected to a 220 V line has two resistance coils A and B, each of 24 Ω resistance, which may be used separately, in series, or in parallel. What are the currents in the three cases?

Calculate the number of electrons constituting one coulomb of charge.

Explain the following.

(a) Why is the tungsten used almost exclusively for filament of electric lamps?
(b) Why are the conductors of electric heating devices, such as bread-toasters and electric irons, made of an alloy rather than a pure metal?
(c) Why is the series arrangement not used for domestic circuits?
(d) How does the resistance of a wire vary with its area of cross-section?
(e) Why are copper and aluminium wires usually employed for electricity transmission?

Several electric bulbs designed to be used on a 220 V electric supply line, are rated 10 W. How many lamps can be connected in parallel with each other across the two wires of 220 V line if the maximum allowable current is 5 A?

An electric lamp of 100 Ω, a toaster of resistance 50 Ω, and a water filter of resistance 500 Ω are connected in parallel to a 220 V source. What is the resistance of an electric iron connected to the same source that takes as much current as all three appliances, and what is the current through it?

Let the resistance of an electrical component remains constant while the potential difference across the two ends of the component decreases to half of its former value. What change will occur in the current through it?

How much energy is given to each coulomb of charge passing through a 6 V battery?

Why are coils of electric toasters and electric irons made of an alloy rather than a pure metal?

Draw a schematic diagram of a circuit consisting of a battery of three cells of 2 V each, a 5 Ω resistor, an 8 Ω resistor, and a 12 Ω resistor, and a plug key, all connected in series.

Did Döbereiner’s triads also exist in the columns of Newlands’ Octaves? Compare and find out.

What is a good source of energy?

Why is diffusion insufficient to meet the oxygen requirements of multi-cellular organisms like humans?

What are trophic levels? Give an example of a food chain and state the different trophic levels in it.

What changes can you make in your habits to become more environment-friendly?

What is the difference between a reflex action and walking?

What is the importance of DNA copying in reproduction?

If a trait A exists in 10% of a population of an asexually reproducing species and a trait B exists in 60% of the same population, which trait is likely to have arisen earlier?

Why should a magnesium ribbon be cleared before burning in air?

Define the principal focus of a concave mirror.

Name two energy sources that you would consider to be renewable. Give reasons for your choices.

What are the methods used by plants to get rid of excretory products?

A positively-charged particle (alpha-particle) projected towards west is deflected towards north by a magnetic field. The direction of magnetic field is

   (a) towards south                 (b) towards east
   (c) downward                       (d) upward

On the basis of the issues raised in this chapter, what changes would you incorporate in your lifestyle in a move towards a sustainable use of our resources?

What are alloys?

How is the movement of leaves of the sensitive plant different from the movement of a shoot towards light?

The kidneys in human beings are a part of the system for

   (a) nutrition.                  (c) excretion.
   (b) respiration.              (d) transportation.

Why are we looking at alternate sources of energy?

Why does the Sun appear reddish early in the morning?

Why is DNA copying an essential part of the process of reproduction?