An electrician is carrying out some repairs in your house. He wants to replace a fuse by a piece of wire. Would you agree? Give reasons for your response.
No, the electrician will not be allowed to replace the fuse by piece of wire in the house. This is because a fuse filament cannot be made by any kind of wire. It must have a low melting point, so that it could melt easily and break, if the large amount of current is passes through it.
Draw in your notebook the symbols to represent the following components of electrical circuits: connecting wires, switch in the ‘OFF’ position, bulb, cell, switch in the ‘ON’ position, and battery
Fig.14.22 shows four cells fixed on a board. Draw lines to indicate how you will connect their terminals with wires to make a battery of four cells.
Do you think an electromagnet can be used for separating plastic bags from a garbage heap? Explain.
In the circuit shown in Fig. 14.25
(i) Would any of the bulb glow when the switch is in the ‘OFF’ position?
(ii) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the ‘ON’ position?
Will the compass needle show deflection when the switch in the circuit shown by Fig.14.24 is closed?
When the current is switched on through a wire, a compass needle kept nearby gets deflected from its north-south position. Explain.
Mark ‘T’ if the statement is true and ‘F’ if it is false:
(a) To make a battery of two cells, the negative terminal of one cell is connected to the negative terminal of the other cell. (T/F)
(b) When the electric current through the fuse exceeds a certain limit, the fuse wire melts and breaks. (T/F)
(c) An electromagnet does not attract a piece of iron. (T/F)
(d) An electric bell has an electromagnet. (T/F)
Zubeda made an electric circuit using a cell holder shown in Fig. 14.4, a switch and a bulb. When she put the switch in the ‘ON’ position, the bulb did not glow. Help Zubeda in identifying the possible defects in the circuit.
Draw the circuit diagram to represent the circuit shown in Fig.14.21.
Fill in the blanks:
(a) Longer line in the symbol for a cell represents its terminal .
(b) The combination of two or more cells is called a .
(c) When current is switched ‘on’ in a room heater, it .
(d) The safety device based on the heating effect of electric current is called a .
State similarities and differences between the laboratory thermometer and the clinical thermometer.
State differences between acids and bases.
Classify the changes involved in the following processes as physical or chemical changes:
(a) Photosynthesis
(b) Dissolving sugar in water
(c) Burning of coal
(d) Melting of wax
(e) Beating aluminium to make aluminium foil
(f ) Digestion of food
Name the elements that determine the weather of a place.
Fill the missing word in the blank spaces in the following statements:
(a) Wind is——————air.
(b) Winds are generated due to —————— heating on the earth.
(c) Near the earth’s surface __________air rises up whereas ___________ air comes down.
(d) Air moves from a region of ——— pressure to a region of ———.
In addition to the rock particles, the soil contains
(i) air and water
(ii) water and plants
(iii) minerals, organic matter, air and water
(iv) water, air and plants
Why does an athlete breathe faster and deeper than usual after finishing the race?
Match structures given in Column I with functions given in Column II.
Column I Column II
(i) Stomata (a) Absorption of water
(ii) Xylem (b) Transpiration
(iii) Root hairs (c) Transport of food
(iv) Phloem (d) Transport of water
(e) Synthesis of carbohydrates
Fill in the blanks:
(a) Production of new individuals from the vegetative part of parent is called_____________.
(b) A flower may have either male or female reproductive parts. Such a flower is called_____________.
(c) The transfer of pollen grains from the anther to the stigma of the same or of another flower of the same kind is known as _____________.
(d) The fusion of male and female gametes is termed as _____________.
(e) Seed dispersal takes place by means of _____________, _____________ and _____________.
Classify the following as motion along a straight line, circular or oscillatory motion:
(i) Motion of your hands while running.
(ii) Motion of a horse pulling a cart on a straight road.
(iii) Motion of a child in a merry-go-round.
(iv) Motion of a child on a see-saw.
(v) Motion of the hammer of an electric bell.
(vi) Motion of a train on a straight bridge.
Can we survive only on raw, leafy vegetables/grass? Discuss.
Label Fig. 2.11 of the digestive system.
Fill in the blanks:
(a) Production of new individuals from the vegetative part of parent is called_____________.
(b) A flower may have either male or female reproductive parts. Such a flower is called_____________.
(c) The transfer of pollen grains from the anther to the stigma of the same or of another flower of the same kind is known as _____________.
(d) The fusion of male and female gametes is termed as _____________.
(e) Seed dispersal takes place by means of _____________, _____________ and _____________.
Mark ‘T’ if the statement is true and ‘F’ if it is false:
(a) The freshwater stored in the ground is much more than that present in the rivers and lakes of the world. (T/F)
(b) Water shortage is a problem faced only by people living in rural areas. (T/F)
(c) Water from rivers is the only source for irrigation in the fields. (T/F)
(d) Rain is the ultimate source of water. (T/F)
Fill in the blanks:
(a) An image that cannot be obtained on a screen is called ____________.
(b) Image formed by a convex __________ is always virtual and smaller in size.
(c) An image formed by a __________ mirror is always of the same size as that of the object.
(d) An image which can be obtained on a screen is called a _________ image.
(e) An image formed by a concave ___________ cannot be obtained on a screen.
Why do organisms need to take food?
State the main difference between asexual and sexual reproduction.
Fill in the blanks in the following statements:
(a) When carbon dioxide is passed through lime water, it turns milky due to the formation of _________.
(b) The chemical name of baking soda is _________.
(c) Two methods by which rusting of iron can be prevented are _________ and _________.
(d) Changes in which only _________ properties of a substance change re called physical changes.
(e) Changes in which new substances are formed are called _________ changes.
State two differences between a convex and a concave lens.
Fill in the blanks:
(i) The average weather taken over a long time is called ___________. (ii) A place receives very little rainfall and the temperature is high throughout the year, the climate of that place will be ___________ and ___________ .
(iii) The two regions of the earth with extreme climatic conditions are ___________ and __________.