Fig.14.22 shows four cells fixed on a board. Draw lines to indicate how you will connect their terminals with wires to make a battery of four cells.
In order to make battery, the positive terminal (+) of one cell should be connected to the (-) terminal of another cell and so on. Battery or we can say cell should be connected in series.
Draw in your notebook the symbols to represent the following components of electrical circuits: connecting wires, switch in the ‘OFF’ position, bulb, cell, switch in the ‘ON’ position, and battery
Do you think an electromagnet can be used for separating plastic bags from a garbage heap? Explain.
In the circuit shown in Fig. 14.25
(i) Would any of the bulb glow when the switch is in the ‘OFF’ position?
(ii) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the ‘ON’ position?
Will the compass needle show deflection when the switch in the circuit shown by Fig.14.24 is closed?
When the current is switched on through a wire, a compass needle kept nearby gets deflected from its north-south position. Explain.
An electrician is carrying out some repairs in your house. He wants to replace a fuse by a piece of wire. Would you agree? Give reasons for your response.
Mark ‘T’ if the statement is true and ‘F’ if it is false:
(a) To make a battery of two cells, the negative terminal of one cell is connected to the negative terminal of the other cell. (T/F)
(b) When the electric current through the fuse exceeds a certain limit, the fuse wire melts and breaks. (T/F)
(c) An electromagnet does not attract a piece of iron. (T/F)
(d) An electric bell has an electromagnet. (T/F)
Zubeda made an electric circuit using a cell holder shown in Fig. 14.4, a switch and a bulb. When she put the switch in the ‘ON’ position, the bulb did not glow. Help Zubeda in identifying the possible defects in the circuit.
Draw the circuit diagram to represent the circuit shown in Fig.14.21.
Fill in the blanks:
(a) Longer line in the symbol for a cell represents its terminal .
(b) The combination of two or more cells is called a .
(c) When current is switched ‘on’ in a room heater, it .
(d) The safety device based on the heating effect of electric current is called a .
State similarities and differences between the laboratory thermometer and the clinical thermometer.
State differences between acids and bases.
Classify the changes involved in the following processes as physical or chemical changes:
(a) Photosynthesis
(b) Dissolving sugar in water
(c) Burning of coal
(d) Melting of wax
(e) Beating aluminium to make aluminium foil
(f ) Digestion of food
Name the elements that determine the weather of a place.
Fill the missing word in the blank spaces in the following statements:
(a) Wind is——————air.
(b) Winds are generated due to —————— heating on the earth.
(c) Near the earth’s surface __________air rises up whereas ___________ air comes down.
(d) Air moves from a region of ——— pressure to a region of ———.
In addition to the rock particles, the soil contains
(i) air and water
(ii) water and plants
(iii) minerals, organic matter, air and water
(iv) water, air and plants
Why does an athlete breathe faster and deeper than usual after finishing the race?
Match structures given in Column I with functions given in Column II.
Column I Column II
(i) Stomata (a) Absorption of water
(ii) Xylem (b) Transpiration
(iii) Root hairs (c) Transport of food
(iv) Phloem (d) Transport of water
(e) Synthesis of carbohydrates
Fill in the blanks:
(a) Production of new individuals from the vegetative part of parent is called_____________.
(b) A flower may have either male or female reproductive parts. Such a flower is called_____________.
(c) The transfer of pollen grains from the anther to the stigma of the same or of another flower of the same kind is known as _____________.
(d) The fusion of male and female gametes is termed as _____________.
(e) Seed dispersal takes place by means of _____________, _____________ and _____________.
Classify the following as motion along a straight line, circular or oscillatory motion:
(i) Motion of your hands while running.
(ii) Motion of a horse pulling a cart on a straight road.
(iii) Motion of a child in a merry-go-round.
(iv) Motion of a child on a see-saw.
(v) Motion of the hammer of an electric bell.
(vi) Motion of a train on a straight bridge.
11. A virtual image larger than the object can be produced by a
(i) concave lens (ii) concave mirror
(iii) convex mirror (iv) plane mirror
The rear view mirror of a car is a plane mirror. A driver is reversing his car at a speed of 2 m/s. The driver sees in his rear view mirror the
image of a truck parked behind his car. The speed at which the image of the truck appears to approach the driver will be
(i) 1 m/s (ii) 2 m/s
(iii) 4 m/s (iv) 8 m/s
State whether the following statements are true or false. In case a statement is false, write the corrected statement in your notebook.
(a) Cutting a log of wood into pieces is a chemical change. (True/False)
(b) Formation of manure from leaves is a physical change. (True/False) (c) Iron pipes coated with zinc do not get rusted easily. (True/False)
(d) Iron and rust are the same substances. (True/False)
(e) Condensation of steam is not a chemical change. (True/False)
Why is it necessary to excrete waste products?
Fill in the blanks:
(i) The average weather taken over a long time is called ___________. (ii) A place receives very little rainfall and the temperature is high throughout the year, the climate of that place will be ___________ and ___________ .
(iii) The two regions of the earth with extreme climatic conditions are ___________ and __________.
Which type of lens forms always a virtual image?
What are the components of blood?
Describe the various ways by which seeds are dispersed.
Which of the following are not correct?
(i) The basic unit of time is second.
(ii) Every object moves with a constant speed.
(iii) Distances between two cities are measured in kilometres.
(iv) The time period of a given pendulum is not constant.
(v) The speed of a train is expressed in m/h.
Given below is a sequence of steps in the processing of wool. Which are the missing steps? Add them.
Shearing, __________, sorting, __________, __________, _________.