Class 8 Science - Chapter Chemical Effects of Electric Current NCERT Solutions | Is it safe for the electrician to carry

In case of a fire, before the firemen use the water hoses, they shut off the main electrical supply for the area. Explain why they do this.

The process that you saw in Activity 14.7 is used for purification of copper. A thin plate of pure copper and a thick rod of impure copper are used as electrodes. Copper from impure rod is sought to be transfered to the thin copper plate. Which electrode should be attached to the positive terminal of battery and why?

Does pure water conduct electricity? If not, what can we do to make it conducting?

Name three liquids, which when tested in the manner shown in Fig.14.9, may cause the magnetic needle to deflect.

The bulb does not glow in the setup shown in Fig.14.10. List the possible reasons. Explain your answer.

Prepare a list of objects around you that are electroplated.

Fill in the blanks
(a) Most liquids that conduct electricity are solutions of , ______________ and ______________.
(b) The passage of an electric current through a solution causes ______________ effects.
(c) If you pass current through copper sulphate solution, copper gets deposited on the plate connected to the terminal of the battery.
(d) The process of depositing a layer ofany desired metal on another material by means of electricity is called .

Paheli had heard that rainwater is as good as distilled water. So she collected some rainwater in a clean glass tumbler and tested it using a tester. To her surprise she found that the compass needle showed deflection. What could be the reasons?

A tester is used to check the conduction of electricity through two liquids, labeled A and B. It is found that the bulb of the tester glows brightly for liquid A while it glows very dimly for liquid B. You would conclude that

(i) liquid A is a better conductor than liquid B.
(ii) liquid B is a better conductor than liquid A.
(iii) both liquids are equally conducting.
(iv) conducting properties of liquid cannot be compared in this manner.

When the free ends of a tester are dipped into a solution, the magnetic needle shows deflection. Can you explain the reason?

Which of the following can be beaten into thin sheets?
  (a) Zinc     (b) Phosphorus     (c) Sulphur     (d) Oxygen

Give two examples each of situations in which you push or pull to change the state of motion of objects.

Fill in the blanks:
(a) Friction opposes the _____________ between the surfaces in contact with each other.
(b) Friction depends on the _____________ of surfaces.                                                                                                                                                                      (c) Friction produces __________.
(d) Sprinkling of powder on the carrom board ________ friction.
(e) Sliding friction is ___________ than the static friction.

List conditions under which combustion can take place.

Indicate whether the following statements are True (T) or False (F).
(a) Unicellular organisms have one-celled body. (T/F)
(b) Muscle cells are branched. (T/F)
(c) The basic living unit of an organism is an organ. (T/F)
(d) Amoeba has irregular shape. (T/F)

Which of the following cannot be charged easily by friction?
(a) A plastic scale
(b) A copper rod
(c) An inflated balloon
(d) A woollen cloth.

Fill in the blanks:
(a) A place where animals are protected in their natural habitat is called                  .
(b) Species found only in a particular area is known as                          .
(c) Migratory birds fly to far away places because of                     changes.

Suppose you are in a dark room. Can you see objects in the room? Can you see objects outside the room. Explain.

What are the different ways in which water gets contaminated ?

Explain the importance of reproduction in organisms.

Give two examples of situations in which applied force causes a change in the shape of an object.

‘Avoid plastics as far as possible’. Comment on this advice.

Abida and Ramesh were doing an experiment in which water was to be heated in a beaker. Abida kept the beaker near the wick in the yellow part of the candle flame. Ramesh kept the beaker in the outermost part of the flame. Whose water will get heated in a shorter time?

A blacksmith hammers a hot piece of iron while making a tool. How does the force due to hammering affect the piece of iron?

Explain the difference between the thermoplastic and thermosetting plastics.

Explain why plastic containers are favoured for storing food.

‘Manufacturing synthetic fibres is actually helping conservation of forests’. Comment.

Fill in the blanks with appropriate words:

(a) Synthetic fibres are also called ______ or _______ fibres.
(b) Synthetic fibres are synthesised from raw material called ________.
(c) Like synthetic fibres, plastic is also a __________ .

Should the handle and bristles of a tooth brush be made of the same material? Explain your answer.

Match the terms of column I correctly with the phrases given in column II.
       Column I                 Column II
  (i) Polyester           (a) Prepared by using wood pulp
  (ii) Teflon                (b) Used for making parachutes and stockings
  (iii) Rayon              (c) Used to make non-stick cookwares
  (iv) Nylon               (d) Fabrics do not wrinkle easily